CUSTOMIZED SHADE GUIDES ARE AVAILABLE
FOR ALL JUSTI TOOTH LINES!

Justi^® Imperial^®

Justi Imperial offers an incisal and interproximal blend that gives this beautiful line of teeth the unique ability to absorb and reflect surrounding color. This means more latitude for blending with natural teeth - resulting in less resets due to shade, especially in partial denture cases. For repairs, the Justi Imperial's special interproximal blend is not only a time saver but a customer pleaser. Justi Imperial anterior and posterior teeth are available in 18 shades - 20, 25, 35, 45, 50, 59, 60, 62, 64, 65, 66, 67, 68, 69, 70, 77, 81 and 82. Justi Imperial molds include 39 upper anteriors, 10 lower anteriors, 17 upper and 17 lower posteriors. The tooth molds are available in graduated giant, medium, normal and small sizes. They all have good labial anatomy and over-polishing is not a major concern. The most sophisticated aesthetics for full dentures can be achieved by using Types 9, 10 and 12 molds. They are specifically designed for minimum difficulty in full denture set up. Type 1 molds are great for partial work because they have a wide neck and almost parallel sides which provides for adequate gingival coverage. They also feature an extended range of sizes: three giant sizes (1G, 5G, 9G) and three tiny sizes (1T, 5T, 9T). There are also anatomically shaped lower molds; YL, VL, YS, VS and very large lowers such as Mold U. The Justi Imperial posteriors are available in 33 degree, 20 degree, 10 degree and 0 degree occlusal forms - also in all 18 shades. For the close bite case, which always requires additional grinding, there are three sort sizes: 30S, 32S and 34S, which are short on the lingual and long on the buccal for good natural aesthetics. This feature is sought after by experienced denture technicians, and is virtually exclusive to the Justi Imperial line.

There are two different shade guides available for this tooth line. The Justi Imperial Maxillary Centrals Shade Guide displays twelve of the most popular blended shades in centrals only. It is affordably packaged in an optically neutral light blue frame with an Eterna shield and a Kroma tab which allows the technician to view the teeth on a neutral background. This shade guide can be customized with the name of a laboratory or clinic, as well as a marketing message.

The Justi Imperial Eterna Shade Guide is presented in an Eterna shield and holds all eighteen blended shades of this beautiful tooth line. Each shade of the guide has a central, a lateral and a cuspid which are in the same hue but in different "tones", thereby creating a natural blended effect. It is recommended that the shade guide be disinfected by soaking in an acid or alkaline glutaraldehyde solution.

Justi Imperial teeth are made according to ADA Specification #15 for artificial resin teeth. The teeth are photogenic, vacuum-processed and are 100% guaranteed to be bondable to methyl-methacrylate denture base materials.

*Cross-linked *Wear Resistant *Solvent Resistant *Fluorescent

Justi^® Blend^®
Multi-blended Hardened Plastic Teeth

Justi Blend brings a fresh and natural look to multi-blended characterized plastic anterior teeth. It is the right choice for today's cosmetic industry. Justi Blend is a highly cross-linked, fluorescent, vacuum processed, laminated plastic tooth. It is unique in that the structure of this tooth line creates the vitality of a natural tooth. The centrals, laterals and cuspids each have a different tone and this combination of tones blend together in one set. The semi-translucent body helps create a depth within the tooth and reflects color from within, just as dentine does in a natural tooth. Justi Blend posteriors are designed to articulate with Justi Blend anteriors as well as Dentsply's Bioblend and Bioblend IPN anteriors. The line is available in 18 upper and lower molds in 0 degree, 10 degree, 20 degree and 33 degree anatomical medium and long. Anteriors and posteriors are available in nine shades: 200, 202, 204, 206, 208, 210, 212, 214 and 216.

There are two different shade guides available for this tooth line. The Justi Blend Maxillary Centrals Shade Guide displays nine blended shades in centrals only. It is affordably packaged in an optically neutral light blue frame with an Eterna shield and a Kroma tab which allows the specialist to view the teeth on a neutral background. This shade guide can be customized with the name of a laboratory or clinic, plus a marketing message. It is all held in a soft side wallet which has a shade comparison chart included for quick conversions.

The Justi Blend Shade Guide - Extended Blend Selector is attractively presented in a hard black case that holds the nine blended shades of this beautiful tooth line. Each shade of the guide has a central, a lateral and a cuspid which are in the same hue but in different "tones", thereby creating a natural blended effect.

This extended blend selector is made to be used for anteriors and posteriors. Justi Blend anteriors match the central, lateral and cuspid, right and left respectively. Justi Blend posteriors match the right or left cuspid body in tone and hue. All nine Justi Blend shades are presented from light to dark shades. A Kroma tab is included, as well as an Artificial Mold Selector, a Technicians' Ruler and a Shade Comparison chart. For more information about the Artificial Mold Selector and the Technicians' Ruler, please see the Justi Educational Materials in the catalog.

It is recommended that the shade guides be disinfected by soaking in an acid or alkaline glutaraldehyde solution.

Justi Blend teeth are made according to ADA Specification #15 for artificial resin teeth. The teeth are photogenic, vacuum-processed and are 100% guaranteed to be bondable to methyl-methacrylate denture base materials.

Dymon-Hue^® HPT

Dymon-Hue HPT (hardened plastic teeth) are a blended tooth similar to that of natural teeth. They are manufactured with lifelike aesthetics, high quality synthetic resin and have superior hardness. This tooth line is recommended as a "House Brand" tooth for laboratories. The cross-linking system employed is an Interpenetrated, Multi-layered, Intersectional Polymer Network which is solvent and heat resistant. No diatoric retention is necessary. Dymon-Hue HPT anterior and posterior teeth are available in 13 shades - 59, 60, 61, 62, 65, 66, 67, 68, 69, 77, 78, 81 and 87. The copolymer is pigmented with inorganic type pigments that are color stable and unaffected by light or heat. Dymon-Hue HPT molds are available in 34 American anterior molds including 3P, 3N, A25, etc.; and 40 American posterior molds including 10 degree, 20 degree, anatomical, short bite and flat plane. Dymon-Hue HPTs are manufactured in our modern California factory equipped with sophisticated electronics which provides highly consistent production of shades and molds. Skilled technicians who are specially trained to manufacture laminated teeth operate this specialized equipment.

Dymon-Hue HPT are made according to ADA Specification #15 for artificial resin teeth. The teeth are photogenic, vacuum-processed and are 100% guaranteed to be bondable to methyl-methacrylate denture base materials.

*Cross-linked *Wear Resistant *Solvent Resistant *Fluorescent

Mold Charts

WANT MORE INFORMATION?
E-mail us at info@americantooth.com,
Fax us at (805) 483-8482
Request catalogs, mold charts, and brochures.
These publications are also available at our On-line Store .
View/download our current ATI Product Catalog.

[Previous Page] [Back to Top]

Copyright © 2012 American Tooth Industries, Inc.